Fabric selection guide

French Terry vs Brushed Fleece for Sweatshirts

Compare loopback French terry and brushed fleece for a sweatshirt order. Learn what to request from suppliers, check on samples and approve before bulk.

Start with the reverse of the fabric

For a hoodie or crewneck brief, the quickest way to distinguish the two options is to turn the swatch over. French terry, in the loopback sense used here, has visible loops on the inside. Brushed sweatshirt fleece has a raised inner surface. The outside can look smooth on both. Ask the supplier to photograph both faces and identify the reverse on the actual swatch. Trade names vary, so have the quoted construction and finish written beside the swatch code.

Set the feel and silhouette you want before selecting a fabric. A visible loopback can suit a clean interior or a style intended for layering. A brushed back can suit a collection where a soft inner touch is part of the design. Check the proposed material against a garment of the intended shape. Fibre content, knit construction and finishing all affect how the body hangs. Comparing two fabrics at the same weight still leaves those differences to evaluate.

Compare swatches under the same brief

Give suppliers the same style drawing, measurements, colour direction, quantities and decoration plan. Ask for the finished fabric weight, fibre composition, knit construction, finish and swatch reference for each option. A weight figure describes mass per unit area. Compare finished weights on the same basis, and use the fabric weight guide to document any difference in the way a number was measured. Ask the supplier to identify which fabric the quotation assumes if its sample room proposes a substitute.

Record the two swatches side by side. Look at the reverse, drape them over the same edge, and handle each with the rib intended for the cuffs and hem. Record what you can see or feel and which judgement still needs a sewn sample. If both alternatives remain open, request separate quotes using the same size and colour breakdown. Ask for the fabric and finish assumptions and any change to trim or decoration costs. This keeps a fabric substitution from being hidden inside a lower garment price.

Buyer comparison record

Sample A · Loopback
Record the loop structure, drape and feel against the skin. Keep the swatch reference with the quoted finished weight.
Sample B · Brushed reverse
Record the brushing and feel. Carry the swatch reference through to the sewn sample and review the surface again after washing.

Choose the option against the brief and record any open checks before signing off the fabric.

Approve the fabric as part of the garment

Use the proposed body fabric and rib on a sewn sample, with the intended zipper or artwork where relevant. Inspect the inside around seams and pockets and check how the cuffs and hem return after handling. A smooth face or soft reverse can feel different where embroidery, lining or a facing adds another layer. Ask the sampling team to use the proposed decoration and backing on a test piece from the same fabric. Review both sides and record the result under the current material reference.

Before bulk approval, agree how the finished garment will be washed and measured. Compare the sample against the approved measurements after treatment and record any changes in shape, appearance, shade or surface pilling that matter to the brief. Agree the test method and acceptance limits for the order with the relevant quality owner. Save the approved swatch code, rib reference, sample version and any open points together. For a repeat order, ask whether the same construction and finish are available and confirm any replacement before releasing it.

Buyer questions

Can two fabrics with the same GSM feel different?

Yes. Start with comparable finished weights and then compare the knit structure, fibre content and reverse finish. Drape and handle the swatches side by side and check the sewn garment before choosing. Record the swatch code and the approved finish in the brief so the quoted weight stays tied to a physical reference.

What should the quotation identify?

Ask for the fabric reference, finished weight, composition, inside finish and rib option. Send the same garment specifications, quantity and colour split for both fabric choices. Confirm whether any switch in material affects the required finish, decoration or approval sample. This gives the buyer a basis for comparing the two garment quotes.

How should I check embroidery on each fabric?

Ask for the same motif at the intended size and placement on each shortlisted fabric. Review the front for distortion and the reverse for how the backing feels against the body. Use the intended wash conditions and check the sample again. Send the selected fabric and recorded artwork revision with the approval.

Which details go into the bulk approval record?

Record the selected swatch and rib, the approved garment sample and the intended wash and decoration instructions. Keep the measurement chart and its revision in the same record. Mark unresolved tests, shade differences or proposed substitutes for review. Confirm the material reference again if the supplier quotes a different lot or finish.

Prepare your sweatshirt enquiry

Choose a hoodie or crewneck sweatshirt brief, then use the sampling guide and inspection checklist to set your approvals. In the garment enquiry, include the style, swatch references, finished weight, colour split and artwork.

Send an inquiry

Two steps, then review. Text only; no file uploads.

  1. Step 1 of 2 Fit check
  2. Step 2 of 2 Details
01 Project details

Start with five required details. Add your project requirements next, then review before sending.

Choose the closest current category. Construction and supplier fit still require review.

Enter the buyer's working estimate, or “Not confirmed.” This is not an MOQ statement.

Add a website or phone Optional

A link to your brand or company site helps the review start with real context.

Include a number if you would like us to reply by phone or WhatsApp.

Nothing is sent from step 1. The detailed specification comes next.

When you select “Send RFQ”, the text fields are emailed to HACOLD and stored in the private inquiry dashboard for follow-up; short-lived pseudonymous request metadata is used for abuse control. Email and WhatsApp remain available as backup channels. Do not include confidential files until a separate handling method is agreed.